TS1 single-phase 1-ph 2 A 0,46 kW

input for potentiometer 2,5..10 kΩ, electrical activation via setpoint signal 0..10 V = or 0..20 mA, optionally configurable
signal contact at 100% Ua, 1x contact NO, 3A for 250 V ~ or 24 V =, floating, output for ohmic and inductive loads, 0,46 kW (230 V ~ / 2 A)

On stock	No
Configuration	DIP switches
Output voltage	reference voltage for potentiometer: 10 V =
Output switch contact	signal contact at 100% Ua, 1x contact NO, 3A for 250 V ~ or 24 V =, floating, output for ohmic and inductive loads, 0,46 kW (230 V ~ / 2 A)
Input	input for potentiometer 2,5..10 kΩ, electrical activation via setpoint signal 0..10 V = or 0..20 mA, optionally configurable
Operating range temperature (°C)	0..+45
Operating ranges temperature (°C)	0..+45
Power supply	L1, N: 230 V ~ 48..62 Hz, self-synchronizing
Power consumption	typ. 2,5 W
Enclosure	PA
Protection (IP)	IP40, terminal blocks IP23, according to EN 60529
Connection	terminal block, max. 2,5 mm²
Mounting	prepared for mounting on DIN rail TS35 (35x7,5 mm) according to EN 60715
Device length (mm)	100
Device width (mm)	77
Device height (mm)	110
Notes	types up to 4 A with cooling plate
Gefahrgut	No