Filter


Reset
Show item

Single-phase

TS1 single-phase

The TS1 single-phase power thyristor controller is used to control the load or power of industrial load applications (e.g. fans, pumps, lamps, heating coils, industrial ovens). Its solid and compact design permit seamless installation and a wear-free control with a high degree of efficiency.

Application/type Power thyristors
Configuration DIP switches
Output voltage reference voltage for potentiometer: 10 V =
Output switch contact signal contact at 100% Ua, 1x contact NO, 3A for 250 V ~ or 24 V =, floating, output for ohmic and inductive loads, 0,46 kW (230 V ~ / 2 A), 0,92 kW (230 V ~ / 4 A), 1,38 kW (230 V ~ / 6 A), 1,84 kW (230 V ~ / 8 A), 2,3 kW (230 V ~ / 10 A), 2,76 kW (230 V ~ / 12 A)
Input input for potentiometer 2,5..10 kΩ, electrical activation via setpoint signal 0..10 V = or 0..20 mA, optionally configurable
Operating range temperature (°C) 0..+45
Power supply L1, N: 230 V ~ 48..62 Hz, self-synchronizing
Power consumption typ. 2,5 W, typ. 4,5 W, typ. 6,5 W, typ. 9 W, typ. 11 W, typ. 13 W
Enclosure PA
Protection (IP) IP40, terminal blocks IP23, according to EN 60529
Connection terminal block, max. 2,5 mm²
Mounting prepared for mounting on DIN rail TS35 (35x7,5 mm) according to EN 60715
Device length (mm) 100
Device height (mm) 110
Notes types up to 4 A with cooling plate, types 6 A with heat sink, types 8 A and higher with heat sink and fan
Catalogue table Power thyristors
Comparison list
Top