| On stock |
No |
| Configuration |
DIP switches |
| Output voltage |
reference voltage for potentiometer: 10 V = |
| Output switch contact |
signal contact at 100% Ua, signal contact in case of fault state, changeover contacts, 2A for 230 V ~, output for ohmic and inductive loads, 10 kW (400 V ~ / 15 A), 16 kW (400 V ~ / 25 A), 23 kW (400 V ~ / 35 A), 33 kW (400 V ~ / 50 A) |
| Input |
input for potentiometer 2,5..10 kΩ, PWM input 5 V / 5..10 kHz, input for PTC according to DIN 44081, input for reset, electrical activation via setpoint signal 0..10 V = or 0..20 mA, optionally configurable |
| Operating range temperature (°C) |
0..+50 |
| Operating range humidity |
max. 95% rH non-condensing |
| Power supply |
L1, L2, L3, N: 400 V ~ 45..65 Hz, self-synchronizing |
| Power consumption |
typ. 40 W, typ. 67 W, typ. 94 W, typ. 135 W |
| Display |
4 LEDs showing status of the device |
| Enclosure |
aluminium |
| Protection (IP) |
IP40, according to EN 60529 |
| Connection |
terminal block |
| Mounting |
4 mounting holes Ø=8 mm for mounting on galvanized mounting plates (control cabinet) |
| Device length (mm) |
139 |
| Device width (mm) |
200 |
| Device height (mm) |
140 |
| Gefahrgut |
No |
