Application/type |
Duct sensor, Immersion sensor |
Purpose |
Measure values |
Measured values |
temperature |
Interface |
Passive, Active, 0..10 V, 4..20 mA |
Sensor |
SI-Protection against permeation of humidity and mechanical stress (e.g. vibration), NTC10k, Pt1000 DIN cl. B, Ni1000 DIN cl. B, Pt1000 1/3 DIN, Pt100 DIN cl. B, Ni1000TK5000, Pt100 1/3 DIN, NTC10k Precon, NTC10k Carel, NTC1,8k, NTC5k, NTC20k, LM235Z, DS18B20 1-wire, FeT/Staefa, passive |
Output voltage |
0..10 V, min. load 3 kΩ |
Output current |
4..20 mA, max. load 500 Ω |
Operating range temperature (°C) |
-80..+260 |
Operating ranges temperature (°C) |
0..+50, 0..+160, 0..+250, -10..+120, -50..+50, -50..+120, -50..+150, -50..+160, -80..+260 |
Output signal temperature |
scaling analogue output, 0..+50 °C, -50..+50 °C, -10..+120 °C, 0..+160 °C, 0..+250 °C |
Operating range humidity |
max. 85% rH short term condensation |
Accuracy temperature |
±0,2 K (typ. at 21 °C) | ±0,1% of measured value (typ. at 21 °C), ±0,1 K (typ. at 0 °C), ±0,3 K (typ. at 0 °C), ±0,4 K (typ. at 0 °C), ±0,2 K (typ. at 25 °C, temperature dependend) |
Power supply |
15..24 V = (±10%) SELV, 15..35 V = SELV, 15..26 V ~ SELV |
Power consumption |
max. 0,5 W (24 V =), max. 1 W (24 V =), 0,8 VA (24 V ~) |
Material in touch with media |
Sensor probe, Ø=8 mm, stainless steel V4A (1.4571), length 108 mm, length 158 mm, length 208 mm, length 258 mm |
Installation length (mm) |
100, 150, 200, 250 |
Enclosure |
shape B, aluminium |
Protection (IP) |
IP66, according to EN 60529 |
Connection |
cable entry M20 for wire Ø=7 mm, terminal block, max. 1,5 mm² |
Connection cable |
2-wire, 3-wire, 4-wire |
Mounting |
when used as duct sensors: please use mounting flange MF8 stainless steel, for use as immersion sensors please use immersion pocket THVA |
Device length (mm) |
78 |
Device width (mm) |
70 |
Weight (g) |
250 |
Gefahrgut |
No |