Filter
Room Operating Units/Controller
WRF07 RC x
An optically appealing flush-mounted room unit in the design of various switch frame manufacturers. Available in different colors and with different labeling options. Possible operating elements are potentiometers, LEDs, buttons and rocker switches. An integrated temperature sensor is optional. The removable terminal allows for pre-wiring.
Application/type | Room controller |
---|---|
Purpose | Room Climate Control, Measure values |
Measured values | temperature, relative humidity |
Interface | RS485 Modbus, RS485 BACnet, LON FT, Active, 0..10 V |
Functions | temperature control, presence |
Operating functions | setpoint adjustment temperature, presence detection, status feedback via LED |
Operating elements | potentiometer (P), labelling of the manufacturer, button (T) |
Configuration | BUS, DIP switches |
Output voltage | 2x 0..10 V, min. load 10 kΩ, heating + cooling or to control 6-way control valve |
Input | 2x input digital for floating switch contact, 4x input digital for floating switch contact |
Network technology | RS485 Modbus, RS485 BACnet (MS/TP), LON FT (free topology) |
Data transmission | RTU, half-duplex, baud rate 9.600, 19.200, 38.400 or 57.600, parity: none (2 stop bits), even or odd (1 stop bit) |
Operating range temperature (°C) | 0..+50 |
Operating ranges temperature (°C) | 0..+50 |
Output signal temperature | 0..+50 °C |
Operating range humidity | max. 85% rH non-condensing |
Accuracy temperature | ±0,5 K (typ. at 21 °C) |
Measuring range humidity | 0..100% rH non-condensing |
Accuracy humidity | ±2% between 10..90% rH (typ. at 21 °C) |
Power supply | 24 V = (±10%) SELV, 24 V ~ (±10%) SELV |
Power consumption | typ. 0,9 W (24 V =), typ. 1 W (24 V =), 1 VA (24 V ~), 2,5 VA (24 V ~) |
Display | LED for status feedback, green |
Colour | white, pure white matt, black |
Protection (IP) | IP20, according to EN 60529 |
Connection | terminal block, max. 1,5 mm² |
Switch ranges | Berker, Busch-Jaeger, Feller, Gira, Jung, Merten |
Switch range Berker | S.1, B.3 aluminium, B.7, B.7 glass, Q.1, Q.3, K.5 aluminium/stainless steel |
Switch range Busch-Jaeger | alpha nea®, Busch-axcent®, Busch-balance® SI, Busch-Duro 2000® SI, future® linear, impuls, Reflex SI, solo® |
Switch range Feller | EDIZIOdue, STANDARDdue |
Switch range Gira | E2, E3, Esprit, Event, Flächenschalter, Standard 55 |
Switch range Jung | A 500, A 550, A creation, A plus, AS 500, CD 500, LS 990 |
Switch range Merten | 1-M, Antik, Artec, Artec stainless steel, Atelier-M, M-Arc, M-Plan, M-Pure, M-Smart |
Switch range Peha | Aura, Aura glass |
Mounting | flush-mounted in standard EU box (Ø=60 mm, depth min. 45 mm) |
Packaging length (mm) | 90 |
Packaging width (mm) | 90 |
Packaging height (mm) | 80 |
Packaging | case packaging |
Device length (mm) | 81 |
Device width (mm) | 81 |
Device height (mm) | 38 |
Weight (g) | 50 |
No BIM data available
Vorschau | Name |
---|---|
WRF07_ConfigSoftware.zip | |
WRF07_x_rH-RS485_Modbus_Manual.zip | |
WRF07_LON_Firmware.zip | |
WRF06x_WRF07x_Typ_DI4_LON_Firmware.zip | |
WRF07_x_rH-RS485_BACnet_Manual.zip |
Vorschau | Name |
---|---|
WRF07_x_Header.jpg |
No tender texts available