Filter


Reset
Show item

EasySens® Room Operating Units

SR06 LCD

Energy-harvesting wireless room operating unit with an integrated LCD for the measurement of temperature and relative humidity (rH version). Depending on the type, temperature set point, fan stages, room occupancy, lighting or blinds can be controlled using the operating buttons on the device. The device transmits its measured values to corresponding receivers or gateways, which directly process the information or - depending on the application - forward it to a BMS controller. Using the SmartACK protocol, the bidirectional communication is capable of managing a local overwrite from BMS of e.g. set point, fan stages and room occupancy. The SR06 LCD can be wirelessly parameterized by using the airConfig software or alternatively through the optional USB programming interface. Although the SR06 LCD is a self-powered device, the energy capacitor of the device can also be charged via USB interface if required. It can be integrated into almost any 55x55 mm frames, allowing you to choose from many designs and frame manufacturers. The SR06 LCD is mounted by using the adhesive pad or screws.

Application/type Room operating unit
Purpose Room Climate Control, Lighting control, Shading control, Measure values
Measured values temperature, relative humidity
Interface EnOcean (868 MHz), EnOcean (902 MHz)
Functions temperature control, fan control, presence, lighting, blinds/shutter, night setback
Operating functions setpoint adjustment, in steps ±1 to ±10 °C, fan stage adjustment, presence detection, light ON/OFF, blind UP/DOWN, optionally configurable
Operating elements 2 buttons, 4 buttons, labelling {[thermometer] - [thermometer] +}, labelling {[thermometer] - [thermometer] + [fan blades] - [fan blades] +}, labelling {[thermometer] - [thermometer] + [light off] [light on]}, labelling {[thermometer] - [thermometer] + [blind up] [blind down]}, labelling {[thermometer] - [thermometer] + [outside] [indoor]}, labelling {[thermometer] - [thermometer] + [outside] [fan blades] +}
Configuration airConfig, Software/Plug-In for configuration
Radio technology EnOcean (IEC 14543-3-10) 868 MHz, 902 MHz, transmission power <10 mW
Data transmission bidirectional, SmartACK (SmartACKNOWLEDGE), wake up time: 240 sec. (default), heartbeat cycle: every 10th wakeup, optionally configurable
Operating range temperature (°C) 0..+40
Output signal temperature scaling according EEP, 0..+40 °C
Operating range humidity max. 85% rH non-condensing
Accuracy temperature ±0,4 K (typ. at 21 °C)
Measuring range humidity 0..100% rH non-condensing
Accuracy humidity ±5% between 30..70% rH (typ. at 21 °C)
Power supply solar cell, maintenance-free LiPo-battery, use of back-up battery possible for insufficiently lit environments, coin cell CR1632
Enclosure PC V0
Colour white, pure white brilliant, aluminium, Jung aluminium
Protection (IP) IP20, according to EN 60529
Switch ranges Berker, Busch-Jaeger, Feller, Gira, Jung, Merten, (please specify the desired frame when ordering)
Switch range Berker S.1, B.7 glass
Switch range Busch-Jaeger Busch-axcent® with intermediate frame, Busch-balance® SI, future® linear with intermediate frame, solo® with intermediate frame
Switch range Feller EDIZIOdue with intermediate frame, STANDARDdue with intermediate frame
Switch range Gira E2, E3, Esprit, Event, Flächenschalter with intermediate frame, Standard 55
Switch range Jung A 500, A 550, A creation, A plus, AS 500, LS 990 with intermediate frame
Switch range Merten M-Arc, M-Plan, M-Pure, M-Smart
Mounting surface-mounted flat on base using adhesive foil or screws
Delivery content incl. adhesive foil for mounting
Packaging length (mm) 92
Packaging width (mm) 87
Packaging height (mm) 35
Packaging case packaging
Device length (mm) 54
Device width (mm) 54
Device height (mm) 13
Weight (g) 50
Notes minimum illuminance at standard setting: 200 lx for 8 hours, for configuration an optional programming interface is available, energy storage can be recharged with a separate USB-cable, to use the free software airConfig (download) a USB stick, which is able to send and receive EnOcean telegrams, is necessary. The EnOcean USB stick (incl. license) is included in airScan (item No. 566704 for 868 MHz), (refer to accessories), Please note our sheet 'Information EasySens® Radio'
Comparison list

Items

Top