| Application/type |
Duct sensor, Immersion sensor |
| Purpose |
Measure values |
| Measured values |
temperature |
| Interface |
Passive, Active, 0..10 V, 4..20 mA |
| Sensor |
SI-Protection against permeation of humidity and mechanical stress (e.g. vibration), NTC10k, PT1000 DIN cl. B, Ni1000 DIN cl. B, PT1000 1/3 DIN, PT100 DIN cl. B, Ni1000TK5000, PT100 1/3 DIN, NTC10k Precon, NTC10K Carel, NTC1,8K, NTC5K, NTC20K, LM235Z, DS18B20 1-wire, FeT/Staefa, passive |
| Output voltage |
0..10 V, min. load 3 kΩ |
| Output current |
4..20 mA, max. load 500 Ω |
| Operating range temperature (°C) |
-80..+260 |
| Operating ranges temperature (°C) |
0..+50, 0..+160, 0..+250, -10..+120, -50..+50, -50..+120, -50..+150, -50..+160, -80..+260 |
| Output signal temperature |
scaling analogue output, 0..+50 °C, -50..+50 °C, -10..+120 °C, 0..+160 °C, 0..+250 °C |
| Operating range humidity |
max. 85% rH short term condensation |
| Accuracy temperature |
±0,2 K (typ. at 21 °C) | ±0,1% of measured value (typ. at 21 °C), ±0,1 K (typ. at 0 °C), ±0,3 K (typ. at 0 °C), ±0,4 K (typ. at 0 °C), ±0,2 K (typ. at 25 °C, temperature dependend) |
| Power supply |
15..24 V = (±10%) SELV, 15..35 V = SELV, 15..26 V ~ SELV |
| Power consumption |
max. 0,5 W (24 V =), max. 1 W (24 V =), 0,8 VA (24 V ~) |
| Material in touch with media |
Sensor probe, Ø=8 mm, stainless steel V4A (1.4571), length 108 mm, length 158 mm, length 208 mm, length 258 mm |
| Installation length (mm) |
100, 150, 200, 250 |
| Enclosure |
shape B, aluminium |
| Protection (IP) |
IP66, according to EN 60529 |
| Connection |
cable entry M20 for wire Ø=7 mm, terminal block, max. 1,5 mm² |
| Connection cable |
2-wire, 3-wire, 4-wire |
| Mounting |
when used as duct sensors: please use mounting flange MF8 stainless steel, for use as immersion sensors please use immersion pocket THVA |
| Device length (mm) |
78 |
| Device width (mm) |
70 |
| Weight (g) |
250 |
