| Application/type |
Room sensor |
| Purpose |
Measure values |
| Measured values |
temperature, relative humidity, CO2 |
| Interface |
EnOcean (868 MHz) |
| Configuration |
DIP switches |
| Radio technology |
EnOcean (IEC 14543-3-10) 868 MHz, transmission power <10 mW, EEP A5-02-05 (4BS), EEP A5-04-01 (4BS), LoRaWAN® (868 MHz) |
| Data transmission |
wake up time: 100 sec. (default), or 240 sec. (adjustable by DIP switch), heartbeat cycle: every 10th wakeup, every 100 seconds if temperature change >0,3 K, humidity change >1,6% rH |
| Operating range temperature (°C) |
0..+50 |
| Operating ranges temperature (°C) |
0..+40 |
| Output signal temperature |
scaling according EEP, 0..+40 °C |
| Operating range humidity |
max. 85% rH non-condensing |
| Accuracy temperature |
±0,4 K (typ. at 21 °C) |
| Measuring range humidity |
0..100% rH non-condensing |
| Measuring range CO2 |
0..2000 ppm, 0..5000 ppm, optionally configurable |
| Accuracy CO2 |
±50 ppm +3% of measured value (typ. at 21 °C, 50% rH, 1015 hPa), self-calibration Dual Channel |
| Power supply |
solar cell, maintenance-free internal super cap, use of back-up battery possible for insufficiently lit environments, battery ER14505 (3,6 V) |
| Enclosure |
PC V0 |
| Colour |
pure white, aluminium, black |
| Protection (IP) |
IP20, according to EN 60529 |
| Mounting |
flush-mounted on standard EU box (Ø=60 mm), flush-mounted in standard EU box (Ø=60 mm, depth min. 45 mm), surface-mounted flat on base using adhesive foil or screws, base part can be mounted and wired separately |
| Delivery content |
incl. adhesive foil for mounting |
| Packaging length (mm) |
115 |
| Packaging width (mm) |
105 |
| Packaging height (mm) |
30 |
| Packaging |
case packaging |
| Device length (mm) |
110 |
| Device width (mm) |
100 |
| Device height (mm) |
23 |
| Notes |
+ surcharge for design cover (mandatory), please select colour, Please note our sheet 'Information EasySens® Radio' |
