TS3 3-phase

The TS3 three-phase power thyristor controller is used to control the load or power of industrial load applications (e.g. fans, pumps, lamps, heating coils, industrial ovens). Its solid and compact design permit seamless installation and a wear-free control with a high degree of efficiency.

Output voltagereference voltage for potentiometer: 10 V =
Output switch contactsignal contact in case of fault state, changeover contact floating for 230 V ~ / 2 A, signal contact at 100% Ua, changeover contact floating for 230 V ~ / 2 A, operation signal, changeover contact floating for 230 V ~ / 2 A, output for ohmic and inductive loads: 15 A: 10 kW (400 V ~ / 15 A) | 25 A: 16 kW (400 V ~ / 25 A) | 35 A: 23 kW (400 V ~ / 35 A) | 50 A: 33 kW (400 V ~ / 50 A)
Power supplyL1, L2, L3: 400 V ~ 45..65 Hz self-synchronizing
Inputselectrical activation via setpoint signal 0..10 V = or 0..20 mA (selectable via DIP switches), input for potentiometer 2,5..10 kΩ, PWM input 5 V / 5..10 kHz, input for PTC according to DIN 44081, input for reset
Functionsphase angel, optional oscillation, start-up period adjustable (0..10 sec.)
Display4 LEDs for showing state of device
Enclosurealuminium
Protection (IP)IP40 according to EN 60529
Electrical connectionscrew terminal, max. 1,5..10 mm² (depending on type)
Ambient condition0..+50 °C
Mounting4 mounting holes Ø=8 mm for mounting on galvanized mounting plates (control cabinet)
Contact

Contact us:


Thermokon Sensortechnik GmbH
Platanenweg 1
35756 Mittenaar
Tel.: +49 2778 6960-0


Write email


View contact