TS2 3-phase
The TS2 three-phase power thyristor controller is used to control the load or power of industrial load applications (e.g. fans, pumps, lamps, heating coils, industrial ovens). Its solid and compact design permit seamless installation and a wear-free control with a high degree of efficiency.
Output voltage | reference voltage for potentiometer: 10 V = |
---|---|
Output switch contact | signal contact in case of fault state, changeover contact floating for 230 V ~ / 2 A, signal contact at 100% Ua, changeover contact floating for 230 V ~ / 2 A, operation signal, changeover contact floating for 230 V ~ / 2 A, output for ohmic and inductive loads: 75 A: 50 kW (400 V ~ / 75 A) | 90 A: 60 kW (400 V ~ / 90 A) | 120 A: 78 kW (400 V ~ / 120 A) |
Power supply | L1, L2, L3: 400 V ~ (± 15%) 48..62 Hz self-synchronizing |
Inputs | electrical activation via setpoint signal 0..10 V =, 0..20 mA or 4..20 mA (selectable via DIP switches), input for potentiometer 2,5..10 kΩ, input for PTC according to DIN 44081 |
Functions | phase angel, optional oscillation |
Display | 9 LEDs for showing state of device |
Enclosure | aluminium with plexiglas cover |
Protection (IP) | IP23 according to DIN EN 60529 |
Electrical connection | Power connections, M8 connection screw for cable lug, connection control electronics, max. 1.5 mm² |
Ambient condition | 0..+55 °C |
Mounting | 4 mounting holes Ø=8 mm for mounting on galvanized mounting plates (control cabinet) |