TS3 1-phase

The TS3 single-phase power thyristor controller is used to control the load or power of industrial load applications (e.g. fans, pumps, lamps, heating coils, industrial ovens). Its solid and compact design permit seamless installation and a wear-free control with a high degree of efficiency.

Output voltagereference voltage for potentiometer: 10 V =
Output switch contactsignal contact in case of fault state, floating contact NO for 230 V ~ / 2 A, output for ohmic and inductive loads: 15 A: 3,5 kW (230 V ~ / 15 A) | 25 A: 5,75 kW (230 V ~ / 25 A) | 35 A: 8,05 kW (230 V ~ / 35 A) | 50 A: 11,5 kW (230 V ~ / 50 A)
Power supplyL1, N: 230 V ~ 45..65 Hz self-synchronizing
Inputselectrical activation via setpoint signal 0..10 V =, 0..20 mA or 4..20 mA (selectable via DIP switches), input for potentiometer 2,5..10 kΩ
Functionsphase angel, optional oscillation
Display4 LEDs for showing state of device
Enclosurealuminium
Protection (IP)IP40 according to EN 60529
Electrical connectionscrew terminal, max. 1,5..10 mm² (depending on type)
Ambient condition0..+50 °C
Mountingprepared for mounting on DIN rail TS35 (35x7,5 mm) according to EN 60715
Contact

Contact us:


Thermokon Sensortechnik GmbH
Platanenweg 1
35756 Mittenaar
Tel.: +49 2778 6960-0


Write email


View contact