A visually appealing flush-mounted room operating unit in the design of various switch manufacturers. Available in different colors and different labeling variants. Possible operating elements are potentiometer (setpoint adjustment), LEDs (optical feedback), buttons (presence signal) and rocker switch (operating mode changeover). On request, a temperature sensor can be added. The peelable terminal allows pre-wiring.

Measuring values temperature
Output voltage TRV: 1x 0..10 V, min. load 5 kΩ
Power supply 15..24 V = (±10%) or 24 V ~ (±10%) SELV
Power consumption TRV: typ. 0,42 W (24 V =) | 0,84 VA (24 V ~)
Measuring range temp. 0..+50 °C, passive: -35..+70 °C
Accuracy temperature TRV : ±1% of measuring range (typ. at 21 °C), passive: depending on used sensor
Switch range Berker S.1, B.3 aluminum, B.7 glass, Q.1, Q.3, K.5 aluminum | stainless steel
Switch range Busch-Jaeger Busch-balance® SI, Busch-Duro 2000® SI, Reflex SI, solo®, future® linear, impuls, Busch-axcent®, alpha nea®
Switch range Feller EDIZIOdue
Switch range Gira E2, E3, Standard 55, Esprit, Event, F100
Switch range Jung LS 990, A 500, AS 500, A plus, A creation, CD 500
Switch range Merten M-Smart, M-Plan, 1-M, Atelier-M, M-Pure, Artec, Artec stainless steel, Antik
Switch range Peha AURA, AURA glass
Set point (P) potentiometer, 3-wire connection, default value 10 kΩ (for other values please request), active output 0..10 V (optional)
Rotary switch (S) mini rotary switch for fan stage adjustment with up to 5 stages available (please request), switching capacity max. 24 V =/~, 5 W
Button (T) for presence detection, switching capacity max. 600 mW
LED (D) for status feedback, green (standard), several LEDs possible (e.g. green, yellow, red)
Enclosure Central disc in switch manufacturer's design (appearance may vary)
Protection IP20 according to EN 60529
Connection electrical terminal block, max. 1,5 mm²
Ambient condition 0..+50 °C, max. 85% rH non-condensing
Mounting flush-mounting in standard EU box (Ø=60 mm, min. depth=45 mm)
Notes for further variants see chapter room controller, other sensors | operating elements| switch ranges on request
Rocker switch (S) for fan speed adjustment, optional switching stages, 0/I or 0/I/II, switching capacity max. 24 V =/~, 5 W

Contact us:

Thermokon Sensortechnik GmbH
Platanenweg 1
35756 Mittenaar
Tel.: +49 2778 6960-0

Write email

View contact