WRF04 x

A surface-mounted room operating unit with integrated temperature sensor and optionally with display showing the actual value. The device can be mounted directly on the wall, on a flush-mounted box or in conjunction with a surface-mounted frame available as an accessory. Predetermined breaking points for surface-mounted installations are integrated. Possible operating elements are potentiometers, LEDs, buttons and rotary switches for setpoint shifting, fan level adjustment, presence detection, control of other devices and visual feedback. The connection terminal in the lower enclosure part allows pre-wiring.

Measuring valuestemperature
Output voltageTRV: 1x 0..10 V, min. load 5 kΩ
Power supply15..24 V = (±10%) or 24 V ~ (±10%) SELV
Power consumptionTRV: typ. 0,42 W (24 V =) | 0,84 VA (24 V ~)
Measuring range temp.0..+50 °C
Accuracy temperaturepassive: depending on used sensor, ±0,5 K (typ. at 21 °C)
Set point (P)potentiometer, 3-wire connection, default value 10 kΩ (for other values please request), active output 0..10 V (optional)
Rotary switch (S)for fan stage adjustment (max. 5 stages), 5-stages (auto,0,I,II,III), 2-stages (0,I), 3-stages (0,I,II), 4-stages (0,I,II,III), switching capacity max. 24 V =/~, 5 W
Button (T)for presence detection, switching capacity max. 600 mW
LED (D)for status feedback, green (standard), several LEDs possible (e.g. green, yellow, red)
DisplayLCD 29x12 mm, monochrome, optional
EnclosurePC, pure white
ProtectionIP30 according to EN 60529
Cable entrybreaking points top/bottom, rear entry
Connection electricalterminal block, max. 1,5 mm²
Ambient condition-35..+70 °C, max. 85% rH non-condensing
Mountingsurface mounted on flush-mounting box (Ø=60 mm), or to be mounted flat onto the surface using screws, with frame for surface mounting (accessory) or directly on the wall, base part can be mounted and wired separately
Notesfor further variants see chapter room controller, special labelling available on request, special painting available on request, other sensors | operating elements on request
Contact

Contact us:


Thermokon Sensortechnik GmbH
Platanenweg 1
35756 Mittenaar
Tel.: +49 2778 6960-0


Write email


View contact