NOVOS 5 x BUS

The surface-mounted NOVOS 5 x comes in the NOVOS design with an integrated temperature sensor. Possible operating elements are set point potentiometer, status LED with up to 7 selectable colors, rotary switch for fan stage control and a presence button. The connection terminal in the back part allows for separate pre-wiring. The device is furthermore available with an LCD and integrated traffic light indication for indicating the status of measured values. Threshold values and display settings can be individually configured using the Thermokon NOVOSapp.

Measured valuestemperature, humidity, CO2, VOC (depending on the device)
Network technologyRS485 BACnet (MS/TP), RS485 Modbus
Power supply15..35 V = or 19..29 V ~ SELV
Power consumptiontyp. 0,4 W (24 V =) | 0,8 VA (24 V ~)
Measuring range temp.-35..+70 °C
Measuring range humidity0..100% rH non-condensing, enthalpy: 0..85 KJ/kg, absolute humidity: 0..50 | 0..80 g/m³, dew point: 0..+50 | -20..+80 °C, optionally configurable via app, uConfig or BUS
Measuring range CO20..2000 ppm | 0..5000 ppm, optionally configurable via app, uConfig or BUS
Accuracy temperature±0,5 K (typ. at 21 °C)
Accuracy humidity±2% between 10..90% rH (typ. at 21 °C)
Accuracy CO2±50 ppm +3% of measured value (typ. at 21 °C, 50% rH, 1015 hPa)
CalibrationCO2: Dual Channel, Automatic zero point calibration, VOC: self-calibration
Inputs1x input for floating contact
Setpoint (P)potentiometer, depending on the device
Rotary switch (S)for fan stage adjustment (max. 5 stages), 5-stages (auto,0,I,II,III), 2-stages (0,I), 3-stages (0,I,II), 4-stages (0,I,II,III), depending on the device
Button (T)for presence detection, with LED (TD), depending on the device
LED (D)for status feedback, colour configurable via app, uConfig or BUS, depending on the device
DisplayLCD 29x35 mm with RGB backlight, optional, Display and colours optionally configurable via app, uConfig or BUS
Colourpure white, black or aluminium, Operating elements same colour as enclosure
EnclosurePC V0, design cover pure white, black or aluminium
Protection (IP)IP30 according to EN 60529
Cable entryrear entry, breaking points bottom, drill mark top
Electrical connectiontool-free mountable spring clamp, max. 1,5 mm²
Ambient condition-35..+70 °C, LCD: -20..+70 °C, max. 85% rH non-condensing
Mountingflush-mounted on standard EU box (Ø=60 mm), or to be mounted flat onto the surface using screws, base part can be mounted and wired separately
Notesmixed gas sensors detect gases and vapours which can be oxidised (burnt): Body odours, tobacco smoke, exhalations emitted by materials (furniture, carpets, paint, glue ...)
Contact

Contact us:


Thermokon Sensortechnik GmbH
Platanenweg 1
35756 Mittenaar
Tel.: +49 2778 6960-0


Write email


View contact