NOVOS 3 x active

The surface-mounted NOVOS 3 x comes in the NOVOS design with an integrated temperature sensor. Possible operating elements are set point potentiometer, status LED with up to 7 selectable colors and a presence button. It furthermore provides active outputs to superior control systems. The separate back part with its connection terminals allows pre-wiring. The threshold values can be individually configured using the Thermokon NOVOSapp.

Measured valuestemperature, humidity, CO2, VOC (depending on the device)
Output voltage1..4x 0..10 V or 0..5 V (adjustable via jumper; live-zero configuration via app or uConfig), min. load 10 kΩ
Power supply15..35 V = or 19..29 V ~ SELV
Measuring range temp.-35..+70 °C
Measuring range humidity0..100% rH non-condensing, enthalpy: 0..85 KJ/kg, absolute humidity: 0..50 | 0..80 g/m³, dew point: 0..+50 | -20..+80 °C, optionally configurable via app or uConfig
Measuring range CO20..2000 ppm | 0..5000 ppm, optionally configurable via app or uConfig
Accuracy temperature±0,5 K (typ. at 21 °C within default measuring range)
Accuracy humidity±2% between 10..90% rH (typ. at 21 °C)
Accuracy CO2±50 ppm +3% of measured value (typ. at 21 °C, 50% rH, 1015 hPa)
CalibrationCO2: Dual Channel, Automatic zero point calibration, VOC: self-calibration
Setpoint (P)potentiometer active, depending on the device
Button (T)for presence detection, with LED (TD), switching capacity max. 600 mW, depending on the device
LED (D)for status feedback, colour configurable via app, uConfig or BUS, depending on the device
Colourpure white, black or aluminium, Operating elements same colour as enclosure
EnclosurePC V0, optionally with design cover black or aluminium
Protection (IP)IP20 according to EN 60529
Cable entryrear entry, breaking points bottom, drill mark top
Electrical connectiontool-free mountable spring clamp, max. 1,5 mm²
Ambient condition-35..+70 °C, max. 85% rH non-condensing
Mountingflush-mounted on standard EU box (Ø=60 mm), or to be mounted flat onto the surface using screws, base part can be mounted and wired separately
Notesfor configuration an optional programming dongle (Bluetooth) is available (refer to accessories), mixed gas sensors detect gases and vapours which can be oxidised (burnt): Body odours, tobacco smoke, exhalations emitted by materials (furniture, carpets, paint, glue ...)
Contact

Contact us:


Thermokon Sensortechnik GmbH
Platanenweg 1
35756 Mittenaar
Tel.: +49 2778 6960-0


Write email


View contact