WRF04 LCD x RR

The surface-mounted room controller with LCD serves for individual temperature control in living, hotel and office rooms. Possible operating elements are potentiometers, rotary switches, buttons and LEDs for setpoint adjustment, fan level selection, presence detection and visual feedback. Depending on the type, continuous or 2-point valves can be controlled for heating or cooling. The connection terminal in the lower housing part allows pre-wiring.

Measuring values temperature
Output voltage AO2V: 2x 0..10 V
Output switch contact Relay: switch contact 24 V | 3 A, floating, Triac: 24 V ~ | 1 A, floating
Network technology RS485 Modbus
Power supply 15..24 V = (±10%) or 24 V ~ (±10%) SELV
Power consumption RS485 Modbus: typ. 0,4 W (24 V =) | 0,6 VA (24 V ~)
Measuring range temp. 0..+50 °C
Accuracy temperature ±0,5 K (typ. at 21 °C)
Inputs 2x entry for floating contacts
Set point (P) potentiometer
Rotary switch (S) for fan stage adjustment (max. 5 stages), 5-stages (auto,0,I,II,III), 2-stages (0,I), 3-stages (0,I,II), 4-stages (0,I,II,III)
Button (T) for presence detection
LED (D) for status feedback, green (standard)
Functions AO2V: 2 inputs, 2 outputs 0..10 V, DO2R: 2 inputs, 2 outputs relay, DO2T: 2 inputs, 2 outputs Triac, OVR: 2 inputs, 2 outputs (1x 0..10 V, 1 relay), OVT: 2 inputs, 2 outputs (1x 0..10 V, 1 Triac)
Display LCD 29x12 mm, monochrome, status-LED, multi-colored
Enclosure PC, pure white
Protection IP30 according to EN 60529
Cable entry breaking points top/bottom, rear entry
Connection electrical terminal block, max. 1,5 mm²
Ambient condition -35..+70 °C, max. 85% rH non-condensing
Mounting surface mounted on flush-mounting box (Ø=68 mm), to be mounted flat onto the surface using adhesive foil or screws, with frame for surface mounting (accessory) or directly on the wall, base part can be mounted and wired separately, DO2T, DO2R, OVR, OVT with IO extension need an additional flush-mounting box (Ø=68 mm)
Notes for further variants see chapter room operating units, special labelling available on request, special painting available on request, for other operating elements please request
Contact

Contact us:


Thermokon Sensortechnik GmbH
Platanenweg 1
35756 Mittenaar
Tel.: +49 2778 6960-0


Write email


View contact