LCF02 BUS
The fancoil controller is designed for individual control of temperature in commercial, industrial and residential buildings. It provides two configurable, digital inputs for e.g. occupancy, window contact, dew-point contact or change-over. Additionally, it is equipped with an input for external (remote) temperature sensors and Modbus interface for configuration of controls parameters. With its flush mounted modern design, the device combines digital technology with a large display and additional buttons, which makes up for an intuitive operation of the single room controller.
| Measuring values | temperature |
|---|---|
| Output voltage | types 2AO3DO: 2x 0..10 V = (heating & cooling or to control 6-way control valve), types 3AO2DO: 3x 0..10 V = (to control EC fan, heating & cooling or to control 6-way control valve), min. load 10 kΩ |
| Output switch contact | types 5DO: 5x contact NO (1x heating, 1x cooling, 3x fan stages), types 2AO3DO: 3x contact NO (3x fan stages), types 3AO2DO: 2x contact NO (heating register 3-stage), 240 V: load max. 3 A |
| Network technology | RS485 Modbus |
| Power supply | 15..24 V = (±10%) SELV |
| Power consumption | typ. 3 W (24 V =) | 5 VA (24 V ~) |
| Measuring range temp. | +1..+50 °C |
| Accuracy temperature | ±1 K (typ. at 21 °C) |
| Inputs | 1x input for change-over sensor NTC10k, 1x input digital for floating contact (window contact, dew point guard), 1x input digital for floating contact (motion sensors, card switch) |
| Control functions | setpoint +1..+50 °C, factory setting (+16..+30°C) |
| Display | LCD 64x41 mm, backlight white |
| Enclosure | ABS, pure white |
| Protection | IP20 according to EN 60529 |
| Connection electrical | terminal block, max. 1,5 mm² |
| Ambient condition | -10..+50 °C, max. 85% rH non-condensing |
| Mounting | flush mounted in standard EU box (Ø=68 mm, min. depth=45 mm) |