NOVOS 3 rH

Room sensor in the new Thermokon enclosure NOVOS 3 for measuring room humidity (relative, absolute, enthalpy, dew point) and temperature. The maintenance-free sensor creates the conditions for a pleasant indoor climate and well-being. Typical applications are schools, office buildings, hotels, cinemas or similar. The threshold values can be individually configured via the Thermokon NOVOSapp. For set point and fan stage adjustment, manual override for room and office applications please refer to NOVOS 3 x in 'Room Operating Units'.

Measuring values humidity, temperature
Output voltage VV: 2x 0..10 V or 0..5 V, (live-zero configuration via Thermokon NOVOSapp), min. load 10 kΩ
Output ampere AA: 2x 4..20 mA, max. load 500 Ω
Network technology RS485 Modbus, RS485 BACnet (MS/TP)
Power supply 15..35 V = or 19..29 V ~ SELV, TRA: 15..35 V = SELV
Power consumption typ. 0,6 W (24 V =) | 1,0 VA (24 V ~)
Measuring range temp. -35..+70 °C
Measuring range humidity 0..100% rH non-condensing, enthalpy: 0..85 KJ/kg, absolute humidity: 0..50 | 0..80 g/m³, dew point: 0..+50 | -20..+80 °C, optionally configurable via Thermokon NOVOSapp or BUS
Accuracy temperature ±0,5 K (typ. at 21 °C)
Accuracy humidity ±2% between 10..90% rH (typ. at 21 °C)
Inputs RS485 Modbus:, 1x input for floating contact
Enclosure PC V0, pure white, design cover (optional)
Protection IP20 according to EN 60529
Cable entry rear entry, breaking points bottom, drill mark top
Connection electrical tool-free mountable spring clamp, max. 1,5 mm²
Ambient condition -35..+70 °C, max. 85% rH non-condensing
Mounting surface mounted on flush-mounting box (Ø=60 mm), or to be mounted flat onto the surface using screws, base part can be mounted and wired separately
Notes for configuration an optional programming dongle (Bluetooth) is available (refer to accessories)
Contact

Contact us:


Thermokon Sensortechnik GmbH
Platanenweg 1
35756 Mittenaar
Tel.: +49 2778 6960-0


Write email


View contact