FTW06

Flush-mounted room sensor for humidity and temperature detection. The sensor meets increased design requirements and is available in standard switch ranges as well as in different color versions. The device is mounted in a flush-mounted box. The sensor is used for a comfortable indoor climate and for mold avoidance, e.g. in hotels, offices, living rooms and meeting rooms. The accuracy of the humidity sensor is 2%.

Measuring values	temperature, humidity
Output voltage	VV \| VVS: 2x 0..10 V (min. load 10 kΩ)
Output passive	PT100 \| PT100 1/3 DIN \| PT1000 \| PT1000 1/3 DIN \| Ni1000 \| Ni1000TK5000, NTC10k \| NTC 10k Precon \| NTC5k \| NTC20k \| NTC1,8k
Network technology	RS485 Modbus
Power supply	15..24 V = (±10%) or 24 V ~ (±10%) SELV, BUS: 15..35 V = or 19..29 V ~ SELV
Power consumption	VV \| VVS: max. 0,3 W (24 V =) \| 0,5 VA (24 V ~)
Measuring range temp.	0..+50 °C
Measuring range humidity	0..100% rH non-condensing
Accuracy temperature	±0,5 K (typ. at 25 °C), passive: depending on used sensor
Accuracy humidity	±2% between 10..90% rH (typ. at 21 °C)
Switch range Berker	S.1, B.3 aluminum, B.7 glass
Switch range Busch-Jaeger	Busch-balance® SI, solo® , future® linear , Busch-axcent® *
Switch range Feller	EDIZIOdue
Switch range Gira	E2, E3, Standard 55, Esprit, Event, F100 *
Switch range Jung	LS 990 , A 500, AS 500, A plus, A creation, CD 500
Switch range Merten	M-Smart, M-Plan, M-Pure, 1-M, Atelier-M, Artec , Artec stainless steel , Antik *
Switch range Peha	AURA, AURA glass
Protection	IP30 according to EN 60529
Connection electrical	terminal block, max. 1,5 mm², pluggable
Ambient condition	0..+50 °C, max. 85% rH short term condensation
Mounting	flush mounted in standard EU box (Ø=60 mm, min. depth=45 mm)
Notes	* in switch program with intermediate frame, please specify frame design when ordering, additional passive sensor available (please specify in order), e.g.: PT100, PT1000, NI1000, NI1000TK5000, NTCxx, LM235Z, other sensors on request