FTW04
The surface-mounted sensor measures relative humidity and temperature of air and non-aggressive indoor gases. Moisture detection makes it possible to achieve a pleasant indoor climate and prevent mold. The accuracy of the humidity sensor is 2%. Optionally, the sensor is available with LCD and control elements. The device can be mounted directly on the wall, on a flush-mounted box or in conjunction with a surface-mounted frame available as an accessory. Predetermined breaking points for surface-mounted installations are available.
| Measuring values | humidity, temperature |
|---|---|
| Output voltage | VV | VVS: 2x 0..10 V (min. load 10 kΩ) |
| Output ampere | AA | AAS: 2x 4..20 mA (max. load 500 Ω) |
| Output passive | VVS | AAS: passive temperature sensor |
| Network technology | BACnet MS/TP, KNX (TP), LON FT (free topology), RS485 Modbus |
| Power supply | 15..24 V = (±10%) or 24 V ~ (±10%) SELV, AA | AAS: 15..24 V = (±10%) SELV, KNX: supply via BUS |
| Power consumption | VV | VVS: max. 0,3 W (24 V =) | 0,5 VA (24 V ~), AA | AAS: max. 1 W (24 V =), BACnet: typ. 0,4 W (24 V =) | 0,6 VA (24 V ~), RS485 Modbus: typ. 0,4 W (24 V =) | 0,6 VA (24 V ~) |
| Measuring range temp. | 0..+50 °C, passive: -35..+70 °C |
| Measuring range humidity | 0..100% rH non-condensing |
| Accuracy temperature | passive: depending on used sensor, ±0,5 K (typ. at 21 °C) |
| Accuracy humidity | ±2% between 10..90% rH (typ. at 21 °C) |
| Inputs | RS485 BACnet (MS/TP)/RS485 Modbus: 2 digital entries, floating, max. wire length 10 m |
| Display | LCD 29x12 mm, monochrome, optional |
| Enclosure | PC, pure white |
| Protection | IP30 according to EN 60529 |
| Cable entry | breaking points top/bottom, rear entry |
| Connection electrical | terminal block, max. 1,5 mm², KNX: KNX terminal block |
| Ambient condition | -35..+70 °C, KNX: -20..+60 °C, max. 85% rH short term condensation |
| Mounting | surface mounted on flush-mounting box (Ø=60 mm), or to be mounted flat onto the surface using screws, with frame for surface mounting (accessory) or directly on the wall, base part can be mounted and wired separately |
| Notes | special painting available on request, additional passive temperature sensor available (type VVS/AAS), for other operating elements please request |