Wall-mounted sensor for measuring relative humidity and temperature in a high quality and inconspicious stainless steel design. For plastering into flush-mounted boxes or installations in hollow walls. Especially designed for museums and exhibitions, where measuring accuracy and almost invisible sensors have to be installed due to architectural design. The precise measurements provided to a BMS system contribute to a comfortable room climate and prevent mold formation.

Measured valueshumidity, temperature
Output voltageVV: 2x 0..10 V or 0..5 V (adjustable via jumper), min. load 10 kΩ
Output currentAA: 2x 4..20 mA, max. load 500 Ω
Power supply15..24 V = (±10%) or 24 V ~ (±10%) SELV, AA: 15..24 V = (±10%) SELV
Power consumptionAA: max. 1 W (24 V =)
Measuring range temp.-40..+60 °C | 0..+50 °C | -20..+80 °C | -15..+35 °C, adjustable at the transducer, default setting: -20..+80 °C
Measuring range humidity0..100% rH non-condensing, enthalpy: 0..85 KJ/kg, absolute humidity: 0..50 | 0..80 g/m³, dew point: 0..+50 | -20..+80 °C, adjustable at the transducer
Accuracy temperature±0,3 K (typ. at 21 °C within default measuring range)
Accuracy humidity±2% between 10..90% rH (typ. at 21 °C)
Enclosureenclosure USE-M, PC, pure white
Protection (IP)enclosure: IP65 according to EN 60529
Cable entryFlextherm M20 for wire Ø=4,5..9 mm, removable
Electrical connectionremovable plug-in terminal, max. 2,5 mm², sensor wire PVC 15 m
Sensor headstainless steel V2A, Ø=13 mm, length=34,4 | 66,4 mm
Ambient condition-35..+70 °C, sensor: -40..+120 °C, max. 85% rH short term condensation
Delivery contentincl. mounting base enclosure USE-M pure white

Contact us:

Thermokon Sensortechnik GmbH
Platanenweg 1
35756 Mittenaar
Tel.: +49 2778 6960-0

Write email

View contact