SR06 LCD
Energy-harvesting design room operating unit for integrated measurement of temperature and relative humidity (rH version). Depending on version and type, temperature setpoint, fan levels, room occupancy, lighting or blinds can be adjusted or switched via the buttons on the device. The device sends its measured values to corresponding receivers or gateways, which process the information directly or – depending on the application – forward it to a central control unit. Using the SmartACKNOWLEDGE Protocol, setpoint, fan level and room occupancy of the bidirectionally operating wireless room operating unit can be externally overwritten and shown in the integrated display. The room control unit is parameterised via radio using airConfig software or alternatively via the optionally available USB programming interface. By using this interface the energy storage can be additionally charged. The device, mounted via adhesive pads or screws, can be integrated into most 55x55 mm switch ranges. This allows to choose from many high quality designs.
| Measuring values | temperature, humidity, depending on the device |
|---|---|
| Radio technology | EnOcean (IEC 14543-3-10) |
| Frequency | 868 MHz, optional:, 902 MHz (Americas) |
| Data transmission | bidirectional, SmartACK (SmartACKNOWLEDGE), airConfig ready |
| Power supply | solar cell, LiPo-battery, maintenance-free, optional: backup battery CR1632 |
| Measuring range temp. | 0..+40 °C |
| Measuring range humidity | 0..100% rH non-condensing |
| Accuracy temperature | ±0,4 K (typ. at 21 °C) |
| Accuracy humidity | ±5% between 30..70% rH (typ. at 21 °C) |
| Measuring interval | WakeUp time = 240 sec. (default), heartbeat cycle = every 10th wakeup, optionally configurable via airConfig or SR06ConfigSW |
| Switch range Berker | S.1, B.7 glass |
| Switch range Busch-Jaeger | Busch-balance® SI, solo® *, future® linear *, Busch-axcent® * |
| Switch range Feller | EDIZIOdue * |
| Switch range Gira | E2, E3, Standard 55, Esprit, Event, F100 * |
| Switch range Jung | A 500, AS 500, A plus, A creation |
| Switch range Merten | M-Smart, M-Plan, M-Pure |
| Control functions | occupancy signalling, fan stages, setpoint |
| No. of buttons | 2T: 2 buttons, 4T: 4 buttons |
| Display | LCD 29x12 mm, monochrome |
| Set point range | +15..+30 °C ±1..10 °C, optionally configurable via airConfig or SR06ConfigSW |
| Enclosure | PC, pure white brilliant, aluminium, Jung aluminium (suitable for switch ranges Jung), anthracite |
| Protection | IP20 according to EN 60529 |
| Ambient condition | 0..+40 °C |
| Weight | 50 g |
| Mounting | to be mounted flat onto the surface using adhesive foil (included) or screws |
| Notes | * in switch program with intermediate frame, integrated coin cell backup possibility for usage in dimly lit rooms, for configuration an optional programming interface is available (refer to accessories), energy storage can be recharged with a separate USB-cable, to use the free software airConfig (download) a USB stick, which is able to send and receive EnOcean telegrams, is necessary. The EnOcean USB stick (incl. license) is included in airScan (item No. 566704 for 868 MHz) |