Unidirectional receiving actuator for (DIN) rail mounting with 4 analogue outputs 0..10 V and 2 (max. 4) potential-free relay outputs. For connecting EasySens® sensors, wireless switches, room operating units and wireless window contacts or window handles. Depending on the application, the device can be parameterized via software to control a fan coil unit with change-over, a PI controller for heating/cooling or 1..10 V dimmers or work as an interface between EasySens® wireless sensors and a BMS controller (overwrite wirelessly). The delivery content includes an external antenna for achieving best possible transmission range.

Output voltage4x 0..10 V
Output switch contact2DO: 2x changeover contact, floating, 4DO: 4x changeover contact, floating
Radio technologyEnOcean (IEC 14543-3-10)
Frequency868 MHz, optional:, 902 MHz (Americas)
Antennaexternal transmitting/receiving antenna with magnetic base
Data transmissionunidirectional
Power supply100..240 V ~, 15..24 V = (±10%) or 24 V ~ (±10%) SELV
Power consumptiontyp. 3,5 W (24 V =) | 6,5 VA (24 V ~), max. 5 VA (..240 V ~)
Functionslighting, blinds/shutter, heating/cooling (PI), fancoil controller, heating ON/OFF, heating with PWM output, heating/cooling with PWM output, signalling contact, hygrostat controller, fan release, switch actuator, multi actuator
Switching values8 A resistive load (24 V =/~ | 230 V ~), 2 A inductive load (230 V ~)
EnclosureABS, light grey
Protection (IP)IP20 according to EN 60529
Electrical connectionterminal block, max. 1,5 mm²
Ambient condition0..+60 °C, max. 85% rH non-condensing
Mountingprepared for mounting on DIN rail TS35 (35x7,5 mm) according to EN 60715
Delivery contentincl. external transmitting/receiving antenna 2,5 m with magnetic base
Notesmagnetic antenna plate recommended to improve radio coverage
Contact

Contact us:


Thermokon Sensortechnik GmbH
Platanenweg 1
35756 Mittenaar
Tel.: +49 2778 6960-0


Write email


View contact