NOVOS 3 CO2

Room sensor in the NOVOS design for measuring CO2, optionally temperature and humidity (relative, absolute, enthalpy, dew point) and traffic light indication with a 7-color LED. The maintenance-free sensor forms the basis for a pleasant room climate and well-being. Especially designed for schools, office buildings, hotels, cinemas and similar applications. Threshold values can be individually configured via Thermokon NOVOSapp. For models with set point and occupancy button, please refer to the 'NOVOS 3 x' in the chapter 'Room Operating Units'.

Measured valuesCO2, temperature + humidity (depending on the device)
Output voltageV: 1x 0..10 V, VV: 2x 0..10 V, 3xV: 3x 0..10 V, 0..10 V or 0..5 V (live-zero can be configured via app or uConfig), min. load 10 kΩ
Output currentA: 1x 4..20 mA, AA: 2x 4..20 mA, 3xA: 3x 4..20 mA, max. load 500 Ω
Network technologyBACnet MS/TP, RS485 Modbus
Power supply15..35 V = or 19..29 V ~ SELV, A | AA | 3xA:, 15..35 V = SELV
Measuring range humidity0..100% rH non-condensing, enthalpy: 0..85 KJ/kg, absolute humidity: 0..50 | 0..80 g/m³, dew point: 0..+50 | -20..+80 °C, optionally configurable via app, uConfig or BUS
Measuring range CO20..2000 ppm | 0..5000 ppm, optionally configurable via app, uConfig or BUS
Accuracy temperature±0,5 K (typ. at 21 °C)
Accuracy humidity±2% between 10..90% rH (typ. at 21 °C)
Accuracy CO2±50 ppm +3% of measured value (typ. at 21 °C, 50% rH, 1015 hPa)
Calibrationself-calibration, Dual Channel
SensorNDIR (non-dispersive, infrared)
InputsRS485 Modbus:, 1x input for floating contact
DisplayRGB-LED indicating air quality (traffic light function ‘TLF’), optional
Colourpure white, black or aluminium
EnclosurePC V0, optionally with design cover black or aluminium
Protection (IP)IP20 according to EN 60529
Cable entryrear entry, breaking points bottom, drill mark top
Electrical connectiontool-free mountable spring clamp, max. 1,5 mm²
Ambient condition0..+50 °C, max. 85% rH non-condensing
Mountingflush-mounted on standard EU box (Ø=60 mm), or to be mounted flat onto the surface using screws, base part can be mounted and wired separately
Notesfor configuration an optional programming dongle (Bluetooth) is available (refer to accessories)
Contact

Contact us:


Thermokon Sensortechnik GmbH
Platanenweg 1
35756 Mittenaar
Tel.: +49 2778 6960-0


Write email


View contact