| Application/type |
Cable sensor, Surface sensor |
| Purpose |
Measure values |
| Measured values |
temperature |
| Interface |
Active, 0..5 V, 0..10 V, 4..20 mA |
| Configuration |
jumper |
| Sensor |
SI-Protection against permeation of humidity and mechanical stress (e.g. vibration) |
| Output voltage |
0..10 V or 0..5 V, adjustable via jumper, min. load 5 kΩ |
| Output current |
4..20 mA, max. load 500 Ω |
| Operating range temperature (°C) |
-50..+180 |
| Operating ranges temperature (°C) |
-50..+180 |
| Output signal temperature |
scaling analogue output, 0..+160 °C (default setting), selectable from 4 temperature ranges -50..+50 | -20..+80 | -15..+35 | -10..+120 | 0..+50 | 0..+100 | 0..+160 | 0..+250 °C, adjustable at the transducer |
| Operating range humidity |
max. 85% rH short term condensation |
| Accuracy temperature |
±0,5 K (typ. at 21 °C), within default measuring range, depending on length of connection wire, potentiometer for offset adjustment |
| Power supply |
15..24 V = (±10%) SELV, 24 V ~ (±10%) SELV |
| Power consumption |
typ. 0,4 W (24 V =), max. 0,5 W (24 V =), 0,8 VA (24 V ~) |
| Material in touch with media |
Sensor probe, Ø=11/15 mm, aluminium, hex pressed (IP65) |
| Installation length (mm) |
28 |
| Enclosure |
USE-S, impact- and shock-resistant enclosure with quick-release cover, PC |
| Colour |
pure white |
| Protection (IP) |
IP65, according to EN 60529 |
| Connection |
removable cable entry flextherm M20 for wire Ø=4,5..9 mm, removable plug-in terminal, max. 2,5 mm² |
| Connection cable |
PVC, silicone, 0,25 mm² |
| Length connection wire (m) |
1, 2, 6 |
| Delivery content |
incl. mounting base enclosure USE-S pure white, incl. fixing kit rawlplugs and screws (2x each) |
